Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The blades connect directly into the chassis fabric (vendors open up a part of their fabric for the switch). Just like you would pop in a blade server you pop in a blade switch ;-) It is like any normal L2 switch (with limited L3 features that are n...
Its a switch designed to fit into certain large server chassis offerings from specific vendors. There are specific versions for each manufacturer.E.g. 3020 blades are for HPhttp://www.cisco.com/en/US/docs/switches/blades/3020/hardware/installation/gu...
ougryphon -> you could use private-vlans with communities to achieve this.http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_25_see/configuration/guide/swpvlan.htmllet me know if this helps!
Someone might have changed the rommon setting and inadvertently changed the baud rate while typing in the wrong confreg value. You can try more values (higher than 9600) and see if it comes up properly. Unfortunately I dont think this switch comes wi...
