Hi All,I have enabled 'ip nbar protocol-discovery' in our router and when I checked the traffic generated I can see much of it came from unknown protocol as shown in the attachment. The router is using NBAR software version 13 and no PDLM installed, ...
Hi,I have a problem with our 2 branches accessing http port. Let's say Site B can't access the web server in Site A but Site A can access the web server in Site B. In site A we have Cisco 2811 Router and a Cisco 3560 Core Switch, on site B we have a ...
Hi Guys,I need help on routing settings of our Cisco 1841 router.Out network IP Address is 192.168.0.0 then we have a proxy server with an IP Address of 192.168.15.2, our router IP Address is 192.168.15.1 and the WAN IP of our router is 10.10.12.2 in...
Hi Guys,I'm still new in Cisco and I have an inquiry regarding our router config. Why is it that the serial interface connected to IPVPN modem is configured as virtual? For example we are using this config "serial interface 0/0.20". What is the purpo...
Hi,Our 2800 router would not continue loading and when I connect to the router using hyper terminal this is the error "Bad RAM at location 0xA0000010: wrote 0xA0000010, read 0xA0020010".Can somebody help what the error message means? And how can I fi...
Hi Spremkumar,I have done traceroutes on both sites many times now and everything are working there is no drop in packets at any sites. So sorry so ask this but what is FW?BTW our web servers in site A requires chaching from our Proxy Server to prope...
Hi amagruder,I have setup my proxy server for port forwarding already. But aside from that I also want to control and manage my network as to what protocols and ports they will access to the internet via our Cisco router.Im not comfortable with the 0...
Hi Rick,Thanks for the reply. I can really make use of PBR in our network. The reason I don't want to use the 0.0.0.0 route is simply because I want to control any request going to my proxy server. I think there is something in my network that eat lo...
