Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am getting timeouts for switch connectivity on Fabric Manager. The error in the log is below. Would this be a firewall issue?An authentication problem? Or a configuration problem?%SNMPD-3-ERROR: SNMP log error : usm_process_in_msg : SNMP UDP authen...
I am having trouble setting up a port-channel between MDS & UCS with a particular vsan. I was able to get a port-channel setup on VSAN 1 between and MDS9513 5.0(4d) and UCS 6120 XP 4.2 (1). When I try to do it with a specifc VSAN it fails. I set the...
I am having some problems getting Fabric Manager 5.0(4d) to authenticate to UCS switches (6120XP's at code level 4.2(1)). We are using TACACS+ for the authentication and the UCS switches are configured within TACACS. In Fabric Manager we get the sta...
Fabric Manager SA not updating 3.3(1c). When I make zone changes or when a port goes down it won't update even after doing a rediscover or resync. Is this a bug in FM 3.3(1c)?
Thanks, I was able to move the Fabric Manager server to the same subnet to bypass the firewall issues, so I never found out all the ports that are needed to be accessible.
The only module you will be able to use is the 4/44 8Gbps after upgrading to 4.2(7e). In order to use the 24-port 8Gbps or the 48-port 8Gbps it requires the DS-13SLT-FAB2 on the 9513's. The release notes for 4.2(7e) details what is and what isn't sup...
