About Wouter De Prins

Wouter De Prins · 05-01-2013

Hi,I've been searching on the Support community but can't find the solution.I have two SSID's configured and I want them both on G and N but it looks like the speed is some way limited to 54mbps. I guess the encryption is not the problem as it's ciph...

Wouter De Prins · 08-19-2012

Hi all,I've setup NAT on the WAN (connected to the ISP's modem) port of my Cisco 1861 router to access the internet via 2 VLANS. Now I have a setupbox from my ISP and that needs a public ip address. It's connected on one of the eight switchports on t...

Wouter De Prins · 08-16-2012

Hi all,I've a small problem with NAT. I have a Cisco1861 and that's connected to my ISP's modem via FE0/0. I can ping my intern network without any problem but the NAT isn't working so I can't connect to the internet.Can somebody check what I've did ...

Wouter De Prins · 05-13-2013

Hi,I've enabled WMM and used the WPA2 security as this is required for N.I've also enabled the MCS rates which gives a higher data rate.Regards,Wouter

Wouter De Prins · 05-12-2013

Thanks everybody! Case resolved

Wouter De Prins · 05-01-2013

Yes, very positive 

Wouter De Prins · 05-01-2013

Hi George,Channel Width: below 40 Mhz. When I do a scan with inSSIDer, I can see my SSID's and they are only on 802.11g. Rate seems to be limited to 54mpbs.But I can see some Mac's are connected on 5Ghz...Let me know if you need more information.Wout...

Wouter De Prins · 08-16-2012

Perfect, that was it! Thank you very much!

Member Since	‎05-31-2011 08:33 AM
Date Last Visited	‎08-31-2018 12:01 AM
Posts	8

User Statistics

User Activity

Slow 1142n speed

NAT / 1 public IP

NATproblem

Re: Slow 1142n speed

Re: Slow 1142n speed

Re: Slow 1142n speed

Slow 1142n speed

NATproblem