Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I haven't been able bringing up links between N7k and and the new N5K (5548UP) due to errors with UDLD.Someone else facing same problem ?regardsEdmundN5K:Software BIOS: version 3.5.0 loader: version N/A kickstart: version 5.1(3)N2(1a) sy...
Is it possible to configure the DMZ auto anchor controller to respond with an DHCP offer with respect to the AP-Group of the foreign controller the DHCP request comes from ?We like to use the same ssid for the guest access feature at different sites...
Does anybody tried to use CCKM with PEAP and MS-CHAP-V2?I'd like to use wds to offload much of the load to the wds master.We use the Intel 3945abg (CCX4).CCX-4 should be able to work with CCKM. Edmund
Hi AlexReseating the Transceivers and Changing the cables didn't help.After a reboot of the N5K UDLD works as expected (aggessive at N7K, normal at N5K).Looks a little bite strange as nothing showed up in the N5K logs.Edmund
Thanks for the fast answer.We need to use the same SSID at every foreign location. The wlan configuration needs to be stored in a flash memory of small PDAs. So there is no way to manually pick the SSID. The security should be WPA2 + EAP-PEAP. Thus w...
HiI got the same problem (ACS 4.1) Unchecking validate server cert makes it working.But this way clients will accept any server certificate, i.e. man in the middle will be possible !Is there a way to solve the probleme ?
Of course AP 1100 or 1200 and 7920 work with leap.You can use TKIP and MIC .. works fine.The Manual of Cisco is wrong.Use load 1.07 on 7920 and release 12.2(13)JA3 you can use also vlan.Ensure that you configure native VLAN to the radio interface you...
