Hi all,What would be the best way to configure NAT on Cisco IOS in such a way that when a packet arrives on the outside of my router, it is redirected to an internal host but changing the source IP? Does anyone have a similar IOS configuration?Thanks...
Hi,Here's the current scenario:[LAN] <---> ASA 5520 <---> Cisco 2911 <---> [Internet] <---> Server A | | [DMZ]Whenever I access a website running in "server A" (only HTTP traffic) ev...
Hi,I have the attached topology where we're deploying NAT and PBR to send certain traffic (defined by destination IP address) through one of the Internet links.For some reason there are no matches on access-list 100 rules, the only rule that matches ...
Hi all,I wonder if someone could help me with the following doubts regarding Cisco's Business Attendant Console and Department Attendant Console.I've been reading datasheets and Q&A's but couldn't find what I needed to know.- Is it possible to upgrad...
Hi all,The title says it all, I couldn't find at Cisco Docs how many device LICs I'm going to need for each Cisco Mobile 8.0 client device?Does anyone knows how many LICs are going to be needed per device?Thanks in advice.Regards,Guilherme
Hello,I am having the same issue: my devices are allocated under Enhanced instead of CUWL.I wonder what can be done to solve this allocation issue?I do have the Owner User ID set for the devices and I am sure ELM and UCM are synchronized.Can anyone p...
What if I need to "hide" every public IP addresses from an internal host?What I need is basically a NAT but when any public IP reaches my router's outside on port 80/tcp, I need the connection to be NATed to an internal host on the same destination p...
Hi Mike,Yes it is web traffic however I have already disabled Skinny inspection and the problem persists. There must be something wrong because from the DMZ (routed, no NAT) it works just fine and from the inside it doesn't.Thanks.Guilherme
Hi,The capture I attached to the first message is from the outside interface. The IP 172.16.1.253 belongs to the ASA's outside interface between the ASA and the 2911 router.I did the asp capture but it didn't show anything related to the destination ...