Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello! First sorry about my bad english.I have a 3825 router, i configured remote access ipsec with full tunnel, everything working.My problem is when i connect from somewhere with my laptop i can't access the local lan (for example in work, shop etc...
Hello!First sorry about my english.I configured remote access ipsec, without split tunnel on a 2610 router. Everything work fine, the clients can reach the inside network, but sometimeswhen i try to reach for example google.com, nothing. I start to p...
Hello!First sorry about my bad english.I configured remote-access vpn on a 2610 router and work fine, i didn't change anything (i think), but once after I connected i can't reach the inside web server or hosts. I monitored the traffic with tcpdump an...
Hello!First, sorry about my bad english.I am new in IPSec VPN, I have a 2610 router with c2600-ik9o3s3-mz.123-26.bin ios.I successfully setup remote access vpn (UDP), i can connect to the router and i can ping my inside networks (split tunnel work).I...
debug messages Jun 19 22:53:36: ISAKMP (0:4): Encryption algorithm offered does not match policy!Jun 19 22:53:36: ISAKMP (0:4): atts are not acceptable. Next payload is 3Jun 19 22:53:36: ISAKMP (0:4): Encryption algorithm offered does not match polic...
I found someting again. When i type the webserver's ip address in the browser, on a remote client, the request is came to the outside wan (172.19.10.2) ip address, not to the inside address 172.16.100.204. i installed another web server other pc and ...
After I add everything it worked fine, but if i start downloading from the inside network, the cpu IP INPUT become very high.Here is what I add to config:interface Loopback2 ip address 172.16.100.129 255.255.255.224 ip nat inside!access-list 102 perm...
