Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning, i need a copy of ios to replace the ios on a corrupted router. Can i do a "copy flash tftp" and download the good ios from a live production router without effecting functionality of that router?
Good morning All,My company has a Cisco 3745 as our WAN router. It is dying a slow painful death. Does anyone know what current product offering replaces the 3745?Thanks..
Good morning, we have a dmvpn hub and spoke configuration. Our spokes are dsl lines, they act as a failover for when our MPLS circuits go down.Everything works.Recently we have begun using these dsl lines for internet access at the branches, rather ...
Good morning,I have an 881G 3G router. We use this on an as-needed basis at different branch locations when an ISP has an extended outage.Question is, is there a 4G card for the 881G, or do we have to get a different model router?...if different mod...
Thank you. As it turns out, i do have access to download ios images. I was able to download the same flash i have on all my other routers, but i suspect there is something wrong with my flash - as it says insuffcient storage on flash.And when i boo...
Paolo, when I configure NAT it doesn’t work. It seems like the inside addresses aren’t translating to the outside address. This is what I do:interface FastEthernet0/0description Data LANip address 192.168.23.1 255.255.255.0ip helper-address 172.16.0....
Paolo thank you for the reply.When i don't use the firewall and try to send the internet traffic out the same interface as the dmvpn, the internet doesn't work (but dmvpn does work). To do this i am adding a default route "ip route 0.0.0.0 0.0.0.0 ...
