About clamasters

clamasters · 06-20-2013

I am getting the following error when connecting from a single computer."The VPN connection was terminated due to the loss of the network interface used for the VPN connection."The only reference I can find to this error currently is a person on this...

clamasters · 04-15-2011

My company uses GRE between our POP routers for management purposes. We have a NMS that sits on a public IP at our head end to monitor all remote nodes. The issue I'm having is with 3620 routers, for some reason, I do not get any return traffic fro...

clamasters · 03-31-2011

Below is the interesting part of my config. I have static NAT configured and working inbound for the Exchange Server and the Barracuda, however outbound traffic from those hosts comes out as the interface IP. Thoughts? I've tried a number of thing...

clamasters · 12-09-2010

I am setting up SSL VPN on a pair of ASA's for a client and have run into a problem. I am trying to give special AnyConnect permissions via DAP and one of the criteria that the customer would like to use is a partial hostname. This for example would...

clamasters · 06-24-2009

I am trying to accomplish the same things as a number of others on the forums here but I do not wish to use NAT as this will be an internal router on private Metro-Ethernet connections. I have prepared and attached a diagram displaying what I would ...

clamasters · 04-22-2011

Thanks. I'm going to be ordering a few today and getting these replaced.

clamasters · 04-20-2011

Please see attached. They have been sanitized, but should be an accurate representation. As stated, this issue is only with 3620 routers. All other routers seem to be working with this configuration. Thanks

clamasters · 04-19-2011

NMS is 72.x.x.220. Path is below.72.x.x.220 (NMS) --> 72.x.x.250 (Cisco 3745 f0/0) --> 172.16.100.1 (Cisco 3745 Tun100) --> 172.16.100.2 (Cisco 3620 Tun100) --> 10.0.0.1 (Cisco 3620 f0/0) --> 10.0.0.13 (Remote Node)NMS default gateway as shown above...

clamasters · 04-19-2011

Nobody huh. I have now tried an IOS update without success. I guess I'll be buying 23 routers to replace these.

clamasters · 04-15-2011

Sorry, I do not have a sample config but I did find this. https://supportforums.cisco.com/thread/30956 I would almost think you would need a 3rd ethernet interface.

Member Since	‎01-05-2005 12:57 AM
Date Last Visited	‎10-06-2020 01:15 PM
Posts	39

User Statistics

User Activity

AnyConnect - loss of network interface error

Issue routing across GRE Tunnel

ASA 8.4 - Static NAT - Problem with outbound SMTP

Wildcard Endpoint Attributes - DAP

1811 Router Failover w/ 2 Connections - No NAT

Re: Issue routing across GRE Tunnel

Re: Issue routing across GRE Tunnel

Re: Issue routing across GRE Tunnel

Re: Issue routing across GRE Tunnel

Re: C2811 Separate Ingress / Egress Interfaces (Satellite Modems