Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I recently purchased this AP used for home use. I wanted an AP with A/B/G/N. When I look at the Cisco Sales Page, http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/product_data_sheet0900aecd806b7c5c.htmlIt clearly states...
I am using a Cisco 2821 with IOS 12.4(22)YB8. I have a pretty simple ZBF setup. All TCP, UDP, and ICMP from the internal LAN is inspected to the Internet. My problem is with my IP phone, which connects to an Asterisk Server on the Internet. I can...
This is from the 1252 Data Sheet. So it seems to me, if my 5GHz Radio is at 40-MHz and using 15 MCS, I should have wireless rates up to 300Mbps. Yet I still have only the option for 54Mbps. And the throughput test is way less than 54. Anyone have...
I do that command and see my client connected. Then I perform a speed test and get 1-2MB/s download speeds. I can then go connect to my best buy linksys AP 802.11N and do the same bandwidth test and get close to 20MB/s. Should the Cisco AP not have...
Thank you, that worked perfectly. But now I am seeing different issues, hopefully you or someone else can help. Both my Radios are 802.11N, the 2.4GHZ and the 5GHZ. And neither one has configurable speeds above 54mpbs. I know N speeds should be m...
I seem to have fixed the problem. My phone registers to the phone server on port 5060. So I did this.ip access-list extended VOIP permit udp host X.X.X.X any eq 5060class-map type inspect match-any VOIP match access-group name VOIPpolicy-map type i...
