About m.zafrany

m.zafrany · 02-09-2014

Hi,I tested the last firmware 2.0.7.4 on 10 AP. It was catastrophic because all access points stopped working (no SSID WIFI visible but Ethernet Interface OK) . I downgraded all AP to 2.0.6.1 to solve this problem.Finally, i can't use the last firmwa...

m.zafrany · 10-06-2014

Hi Eric Moyers,It's unacceptable that Cisco taking so long time to release a firmware without bugs. We don't need a BETA firmware but we need a NEW STABLE firmware.I'm really disappointed by this situation.Good luck to all WAP4410N users.Michael

m.zafrany · 03-20-2014

Marty,Thanks a lot for your support. When i will have time, i will call Cisco Support.Best Regards.Michaël

m.zafrany · 02-26-2014

Hi Marty,My case number is 629192705.Cheers.Michael

m.zafrany · 02-23-2014

Hi friends !Cisco support sent me an email with this procedure :the following settings will improve the stability :Setup -> Advanced. Made LAN force to 100 Mbps FullWireless-> Basic Setup. Channel to less interference one (after checking site survey...

m.zafrany · 02-14-2014

Hi !I tested the solution provided by Marty but I have the same problem. I started the setup from the beginning on a new AP with firmware version 2.0.7.4. All WIFI SSID disappear after 10-30 minutes. The web interface and SSH access remains active. I...

Member Since	‎02-09-2014 02:20 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	8

User Statistics

User Activity

WAP4410N and firmware 2.0.7.4

Hi Eric Moyers,It's

Marty,Thanks a lot for your

Re: WAP4410N and firmware 2.0.7.4

Re: WAP4410N and firmware 2.0.7.4

WAP4410N and firmware 2.0.7.4