Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Guys,
I have deployed cisco 3650, IE3000 and IE5000 switches on a customer site and everything was working fine till we connected our Rukus AP's to the cisco IE5000 switches. The AP's keep rebooting on that switch, When we connect the same swi...
Hello Team,I have two routers on remote sites and router A can ping router B and vice versa. Router A can also ping router B's LAN interface and the users on the lan interface but router B cannot ping router A's lan users and only its LAN interface c...
I am configuring a Cisco core switch and Cisco ASA firewall from scratch. The firewall WAN and LAN interfaces are both up and i can get internet on the firewall and ping both outside and inside. The Firewall LAN interface is directly connected to the...
Hello Guys,I am configuring a cisco 4507 catalyst switch and have managed to create a few vlans for testing and i also have connectivity between the vlans and also the access switches. I have internet on the cisco 4507 and am able to ping outside too...
Hello Guys,I am setting up a cisco asa 5505 FW. I can get interent on the FW and i can connect to the vpn client fine and get a address from the vpn pool i created. The only issue is that i cannot reach the inside interface from the VPN pool. Can som...
Thanks Leo, the same cable and AP works fine on all other switches, it works on the IE3000 switch as well, only issue is on the IE5000 switch. The IE5000 has a IP phone connected to it and it works fine but only when you connect the AP, it keeps rebo...
Thanks Leo, the same cable and AP works fine on all other switches, it works on the IE3000 switch as well, only issue is on the IE5000 switch. The IE5000 has a IP phone connected to it and it works fine but only when you connect the AP, it keeps rebo...
