About Oliver Barth

Oliver Barth · 02-25-2014

Hi,we have severe problems to get two of WAP4410N running one as AP and one of them as repeater.First of all we upgraded both to: WAP4410N-fw-2.0.7.4-K9.img. After that we factory reset both.One of them configured as AP with:SSID Broadcast: enabledWi...

Oliver Barth · 03-12-2014

Maybe I should mention that all wifi connection tests has been done under OSX 10.9.2 (Mavericks)

Oliver Barth · 03-12-2014

after hours of testing, here is what I found out:----------(all devices with 2.0.6.1) OR (AP with 2.0.6.1 and repeaters with 2.0.7.4):----------repeating works well, get an IP, everything seems to be fineif I disconnect (take of power) a configured r...

Oliver Barth · 02-28-2014

A colleague of mine allready tried to setup this bridging mode. With no success. This would support your theory that both modes behave very similar. As next step we try to downgrade both devices to 2.0.6.1 firmware. And thank you for this valuable hi...

Oliver Barth · 02-27-2014

You mentioned that you have a connection. I think its not really a connection since one of the devices is only repeating the WIFI signal. You said you had a connection for at least several hours. Does this mean you have been able to connect to the AP...

Oliver Barth · 02-27-2014

We have more than 10 of these APs. But we want to start with two of them. Unluckily I can not state at the moment when these have been bought since we did not buy them all together.

Member Since	‎02-21-2014 05:23 AM
Date Last Visited	‎02-20-2019 02:06 AM
Posts	7

User Statistics

User Activity

Problem with WAP4410N as Repeater

Maybe I should mention that

after hours of testing, here

Problem with WAP4410N as Repeater

Problem with WAP4410N as Repeater

Problem with WAP4410N as Repeater