Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I am trying to diagnose a VPN connection we are having. The platform is a 6504 with a SPA-IPSEC-2G installed, the config looks fine, but I am seeing the follow errors in the logs after run a "clear crypto isakmp"*Sep 9 12:29:59.778 UTC: Crypt...
Hi Guys,We are a new service provider for one of our customers and as a result we need to change the external IP addresses for a ASA5505 pair which are configured for Active/Standby HA.I was wondering what the best way to approach this would be. I wa...
Hi All,We run a small datacentre network, about 150 servers between two data centres with a thrid coming online soon. We currenly have our /21 annouced by our upstream's BGP speakers and they route it to two of our Cisco 3825s which we use to subnet ...
Sucess! So we noticed the HW and FW versions of routers elsewhere in the network were 5.2 (HW) and 8.5(2) (FW) or higher. The device we were having trouble with has HW4.1 and FW 8.5(2). We swapped out the SUP for one with a newer hardware revision a...
Upgraded to, Version 12.2(33)SXI13. Still the same problem. Any other ideas?!Reload scheduled for 22:46:28 BST Mon Jun 19 2000 (in 4 minutes and 29 seconds)Reload reason: FIB Protocol Allocation mismatchFIB TCAM maximum routes :=====================...
We tried this, and an number of other combinations with no luck.We are currently running 12.2(33)SXJ3 and we may upgrade to 12.2(33)SXI13 to see if that fixes the issue.I hope this isn't a hardware issue.
They are nearly identical! Single BGP session with different providers, and HSRP for gateway reundancy, but apart from that exactly the same. *edit* I do have the following line on the working platfom: diagnostic bootup level minimal Which I don't o...