Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there people in my phone, We have a pair of ASAs in a failover pair, and the failover has failed with an interface error. Interfaces on the FW and connecting switch are both up/up, no configuration has been changed, and it's been fine for the la...
Hi there, we administer our firewalls in CSM. I created a backup of a context before doing a change, and now I'm in the situation where the admin context I use in CSM is not seen as part of the device, and the backup one is. I want to delete the b...
Hi there,
Went to connect a 6921 phone and nothing was happening. Power inline was set to auto, and it was showing as on when the phone was connected, but the phone wasn't powering up. Moved it to another port and it came up.
Having a look at the...
Good morning, I don't do a lot with wireless, and I've inherited a site with a fairly large wireless setup. We use 2.4 only, and there's a lot of old kit out there. This is the radio setup on one of our 1240's
speed basic-5.5 11.0 24.0 48.0 power ...
Hi there. We have a couple of WLCs with about 60 APs. On the "Wireless" page, it lists all the APs in order of uptime. Is there any way to list the order by AP name? I'm sure it's something simple, but I can't find it.... Cheers, Al.
What logs are you after? My next plan was to have a beer and get ready for the Monday morning password resets..... xxxxxx/admin/act/pri# sh failFailover OnLast Failover at: 11:06:18 WET Feb 28 2021 This context: Active Active t...
So, had to wait till the weekend, but thought as a first step we'd swop the cable, and if that didn't work, reboot the box, and then finally RMA it. And, very boringly, swopping the cable brought the failover back up, and I've now failed it back ont...
I wouldn't read too much into that, its a phone that hardly gets used except in an emergency.
Anyway, I ran a couple of debugs, and, for the same phone, this is what happened on a port the phone works on:
Nov 30 14:49:49.163: ilpower_hwif_comingu...
Hi there,
Thanks for the reply. Yeah, I read through that before I posted here. I haven't run any debugs yet; which ones would you suggest?
I'm kind of ruling out patch cables and phones, as they both work fine on other ports; the problem seems...
Hi Leo,
Many thanks for the reply.
Its a 3750V2-48PS-E.
I've included the output from port 1/0/14 (where it wouldn't connect) and 2/0/14 (where I now have it connected).
Cheers, Al.
# sh int fa 1/0/14 contrFastEthernet1/0/14 is down, line p...
