Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Am trying to determine why we are seeing outpiut drops on some of our interfaces connected to servers with 100Mb NIC's.6509 with WS-X6748-GE-TXExample,GigabitEthernet1/3/25 is up, line protocol is up (connected) Hardware is C6k 1000Mb 802.3, addr...
Hi,We have a 3 tier application that needs to be load balanced from client to middleware and from middleware to backend. Usually we do this with multiple context's on the ACE. This time we are doing this with multiple VLAN's within the same context. ...
Thanks for reminding me about the mac-sticky command. Yes we need to ensure traffic return path is consistant with multiple interfaces and that fixed it.Cheers,John.
Hi Ivan,Here is the config,access-list BPDU ethertype permit bpduaccess-list everyone line 10 extended permit ip any any parameter-map type http HTTP_PARAM server-conn reuse case-insensitive persistence-rebalanceparameter-map type generic SSLID_PA...
Hi Dan,VLAN47 is client side (bridged to 347 server side)VLAN41 is middleware client side (bridged to 341 server side)VLAN 41 & 47 are on separate subnets.Cheers,John.
Both would work but why you'd use the F/W or ACE as the DG for serverfarm C when you have perfectly functional 3750 L3 switches sitting there is confusing. Also I have done this with two farms, but three would be equally easy.My setup is this,Serverf...
