Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I'm in the process of deploying a new customer site and I'm finding the wireless speeds to be less than ideal. The infrastructure is all new and there are no users online yet. Topology includes an ASA5512x , C9500-16x stacked and C9300-48Ps...
Hi all, I'm facing a daunting task where one of our multi-site customer is having a lot of voice quality issues across most of their sites ever since we migrated them a new network with and a new hosted phone system (Broadsoft w/ polycom phones). My ...
Hi all,
I have an ASA 5505 in my lab where I am trying to enable an IP SLA WAN failover between the primary ISP interface which is a NAT'ed interface and a failover interface that connects to another router that performs the NAT. Can you take a loo...
Hello all, I have a small business customer where we deployed a HPBX phone system. The ASA is acting as the DHCP server for the data and voice vlans. Every PC and phone are functional. There is one phone that I had to assign a static IP since the ASA...
Hello all, I came across a rather strange issue. I am able to SSH to the device from my home but while I am consoled in, I cannot ping the ISP gateway or any other IP's. As expected, all trace-routes fail without hitting the gateway as the first hop....
Hi @Bogdan Nita
I moved my NAT statements around and everything seems to be working as expected now. I placed the 1:1 NAT first and then I added after-auto in my manual NAT to make it less preferred than the dynamic auto NAT.
object network obj-...
Hi @Bogdan Nita
I updated the ASA firmware from 8.2.(1) to 9.2(2) and I made some progress. I am now able to route the LAN traffic un-nated over to the failover device that handles the NAT as expected. The issue I am having now is making the ASA re...
Hi @Bogdan Nita,
Take a look below. I ran the commands two times. The first time was with the primary WAN circuit up and the second time was after I disconnected that cable. The ASA should not NAT the traffic in a failover scenario and it should j...
Hi Bogdan,
Thanks for your reply. My first issue is that I have a server on the LAN and I cannot ping the ASA fail-over interface or the router that connects to the ASA. I ran two packet captures and I am only seeing traffic from the server on the ...
Hi Chris,That is what how I am used to configure the NAT, but IOS 12.3 and on introduced interface NVI0, which according to cisco documentation should make applying the NAT statements "easier". IP nat enable has to be enabled on all interfaces and th...
