Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
All,
We have two Nexus 7K in a VPC domain with the following current configuration.
Nexus #1
vPC role : primary, operational secondary
also active in HSRP
Nexus #2
vPC role : secondary, operational p...
Not sure if this is the correct community to be posting this, but here goes.
I need to see if I can disable the following UDP ports on my Cisco 3850 switches.
UDP ports: 5246, 5247, 6352, 12124,12125,12134,12135,12222,12223,16666,16667,16668
From ...
Not sure if this is the correct community to be posting this, but here goes.
I need to see if I can disable the following UDP ports on my Cisco 3850 switches.
UDP ports: 5246, 5247, 6352, 12124,12125,12134,12135,12222,12223,16666,16667,16668
From ...
Support Community,Ok, so recently we started to see a spike in tcp & udp traffic with the source and destination ports as 0. I did a little research and found this article from PC World,http://www.pcworld.com/article/2061080/spike-in-traffic-with-tc...
I did the "no" form of the above commands and this did not disable the ports.
SWITCH#sh ip socketsProto Remote Port Local Port In Out Stat TTY OutputIF 17 0.0.0.0 0 xxx.xx.x.x 16666 0 0 0 0 17 ...
Furose,
Yes, by default the switches are configured as mobility agents. Which is why I see UDP port 16666.
Mobility Agent Summary:
Mobility Role : Mobility AgentMobility Protocol Port : 16...
