Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a T1 Point to Point connection between a remote facility and my main facility. It is a plain 24 channel 1.544mbps T1.
I have 5 IP telephones at the remote facility that are manually configured and they point back to the main facility where t...
Given the following scenario what would be the best way to restrict the people connecting to this access point so that they can only access the internet and no other internal company resources like our exchange server, print server etc. I have includ...
So i'm having an issue uplinking these two switches together. Currently the ESW is in an upper building at a facility and the C3560 is in a lower building. They were too far apart for regular ethernet cable so we used cisco 1300 series wireless bri...
Upgraded our ASA from 7.2 to 8.4Using the newest version of Cisco VPN Client 5.0.07.0410We have a remote office that VPNs in to connect to the main network to access internal resources.On 7.2 they worked perfectly fine, once we did the upgrade to 8.4...
This is a fairly simple question and i'm sure there is a fairly simple answer but for whatever reason I can't seem to get ICMP blocked properly on my external interface of my ASA. I obviously don't want my external interface to be pingable but no ma...
So presumably I will have to add additional routing on the layer 3 switches and the core router as well as possibly the firewall correct? I am using static routes on everything not RIP, OSPF or EIGRP. This is the only site that needs to have a guest ...
yeah i've already tried that, thats not what the issue is. Like i said did i was able to get the link light to come up briefly but then it went back down again due to some kind of configuartion incompatability
fantastic! that worked like a charm!Now I have another question:because of a recent ISP/IP naming scheme change we have had to NAT our internal exchange server to a public IP address in a block that was provided to us.Because of this NATing, even th...
