Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, had to do a password recovery but must have typed something incorrect. Our ASA5520 now only boots to rommon #0> and we have to type "boot" to get it to fully load. Software version asa804-k8.bin.Tried to go back to factory default, but still only...
Can one rename an ACE context without creating a new context and entering all the information within the old context to the new context? Our boss wants the context name changed but it looks like you have to create a new context and enter all the info...
We have an ACE 4710 device and want to update the software to the latest version (c4710ace-mz.A1_8_0a). We are following the instructions on the Upgrading Your ACE Software document and got as far as the software is loaded on the device, but when I e...
Our ACE is configured and seems to be working correctly and now we would like to enable stickiness. We are receiving an error: Error in saving to DB: Can't create sticky because resource is not allocated. We have created system resource class, but no...
Hi, Can we use private ip addresses (192.168.1.1) for 3550 switches (to conserve ip addresses) and still access for configuration? We tested, but couldn't access, does there need to be further configuration in router or core switch to access the swit...
Hi Syed, No other of the ACE ports are connected to that same VLAN, but I did see an SNMP-Server trap-source using the same VLAN, so I will remove that next week and see how it goes. Thank you for being a resource, hope you are available in the futur...
Thank you Syed. That is kind of what I thought.On question #2, below is how we have the device setup:Outside network cable is plug into a Cisco Switch 24 port switch. Plugged into the switch is Active Directory GC, the ACE output port (#2), ACE input...
Hopefully this is something simple and someone will respond...We have an ACE 4710 device and want to update the software to the latest version (c4710ace-mz.A1_8_0a). We are following the instructions on the Upgrading Your ACE Software document and go...
