Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have 2960X's running 15.2(3)E with high CPU usage (75%/27%) Switch Ports Model SW Version SW Image------ ----- ----- ---------- ----------* 1 52 WS-C2960X-48FPS-L 15.2(3)E...
I have an unusual problem happening on two 2960X switches. VoIP calls are very poor quality (jittery, robotic sounding, "sounds like they are under water). Our first assumption was that the QoS needed some tweaking, but that wasn't the case. Facts:Tw...
LACP and PAgP are not supported on the controller and it appears that the 4500 series will not use LAG.interface Port-channel10 description WLC Port-Channel switchport switchport mode trunk service-policy input AutoQos-4.0-Input-Policy service-policy...
switch(config)#int g1/1switch(config-if)#auto ? qos Configure AutoQoS switch(config-if)#auto qos ? classify Configure classification for untrusted devices trust Trust the DSCP/CoS marking video Configure AutoQoS for video devices voip ...
I have disabled HTTP access but enabled HTTPS access on my switches. switch(config)#no ip http server(this will disable web or http access) switch(config)#ip http secure-server(this will enable https access or no ip http secure-server will disable h...
