Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Scenario:
We will be deploying several FTD in different locations.
FMC communication will all be private IPs (No NAT involved). It will be all just different subnets.
FTD --> Router --> Router --> FMC
We followed the deployment guide, FMC seems ...
Scenario:
We will be deploying several FTD in different locations.
FMC communication will all be private IPs (No NAT involved). It will be all just different subnets.
FTD --> Router --> Router --> FMC
We followed the deployment guide, FMC seems ...
I have a small backbone test lab that has an NTP setup:NTP Source ---> ROUTER1 --> Router2 and other routers reference to ROUTER1 as the server.show ntp statusClock is unsynchronized, stratum 16, no reference clocknominal freq is 190.7348 Hz, actual ...
@Jouni Forss wrote:
Hi,
Taking as example one of our ASA-5585-X ASAs with Trunk interfaces subinterface
I think you need to connect to the ASA which is Active for the admin context. And for the actual user/customer Context you have to connect to ...
Just to update. The FTD 6.1 that I have seems to have some issues. I have deployed the same way on my test lab and all looks fine. Will update this if I find any issues.
Hi Richard, Thank you very much for the reply.When you say high dispersion, is it high dispersion from the NTP source server or the Router that is considered the master?NTP Source Server ---> ROUTER1 Master --> Router2 and other routers reference to ...
