Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Team, I am replacing a 7204VXR Router with an ASR1002-X Router running IOS-XE 3.7.5S When it comes to configure QoS for a traffic class, I am getting the below error when configuring the priority and police commands:"Police and Priority with bandw...
This happens when you permanently save the host key in your client cache, by saving it, the SSH client software will do an integrity check to verify if the key is being maliciously changed by a potential attacker. So if you saved the key on the clien...
Yes they are generated with a combination of domain and hostname, however once you have generated them and you change the hostname you will still be able to SSH to the device, there is no need to generate a new pair. SSH does not make a match with yo...
Hi Mukesh,If you want to allow only port 8080 and ICMP ping, then you just have to restrict the ip any any using the tcp and the ports. For example, this one allows Ping, port 80, port 443 and port 8080:access-list outside_access_in extended permit i...
Hi Phil,I am doing great, yep that's is really funny indeed.I was able to solve the issue, if you send me your portion of QoS configuration at ruggero.delcuratolo@nike.com or ruggero.delcuratolo@xerox.com I'll be glad to help you out.But don't forget...
Hi Mukesh,The Firewall configuration is correct, however when you configure a static NAT between the DMZ host and a public IP, you need to make sure that the Internet is capable of routing to your Firewall defined static NAT IPs via the Internet Rout...
