What you should do is to move the backup file into the 3.1 server using ftp, please remember to use Binary mode as FTP defaults to ASCII, once moved verify the md5 to make sure that it matches the originalone:
md5sum <backupFile>
If you do this the...
Hi
While checking at the pdshow attached we can see the following:
Process= DCRServerState = Never startedPid = 0RC = 0Signo = 0Start = N/AStop = Not applicableCore = Not applicableInfo = Not applicable,
So DCRServer is down as the error mentioned...
Hi
What if you try with the OID instead of the Object?
ObjectcikeTunnelEntryOID1.3.6.1.4.1.9.9.171.1.2.3.1
Also try the table instead:
ObjectcikeTunnelTableOID1.3.6.1.4.1.9.9.171.1.2.3
This is not a permission issue on the ASA, if it was a perm...
Hi
Having the cikeTunnelEntry denied on a snmpwalk is not a problem, this is because all Tables and Entries are not accessible by default:
ObjectcikeTunnelEntryOID1.3.6.1.4.1.9.9.171.1.2.3.1Type CikeTunnelEntry Permissionnot-accessible
However o...
Hi Vince
Indeed 3.0.2 was removed from the downloads page as 3.0.3 was released, so you can install 3.0.3 over 3.0 on the gen1 appliance. You can refer to the 3.0.3 release notes for more information:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/p...