About nesttech1

nesttech1 · 08-22-2024

We have ASR-9006 that we are upgrading from A9K-RSP440-TR running 32-bit IOS XR 6.6.3 to A9K-RSP880-LT-TR running 64-bit IOS XR 7.9.2Is there a good procedure for saving and moving the configuration to the new RSP880 running 64-bit IOS XR ?

nesttech1 · 07-11-2024

Is there a way to upgrade the IOS on this system using the external USB ?While the system is booting, it does not show any options to boot from the the USB, so that we can upgrade the IOS XR versionLet me know what is the process to upgrade the IOS X...

nesttech1 · 05-11-2024

We are trying to set-up A9K-8HG-FLEX-TR in the ASR-9906 chassis with redundant A9K-RSP880-LT-TR and running IOS XR 7.9.3, but after about 2 hours the module is still in the SW_INACTIVE state. All the lights on the module are amber color, but it does...

nesttech1 · 03-30-2024

Can the A99-12X100GE modules run in the ASR-9910 or ASR-9906 at line rate (not oversubscribed) with 5 x A99-SFC-S or 5 x A99-SFC-T ?We have options for A99-RSP-TR or A9K-RSP880-LT-TR. Can this work with these RSPs running IOS XR 7.9.2 ?We have tried...

nesttech1 · 11-04-2023

We have noticed that ASR-9901 running IOS XR 7.5.2 is not keeping the clock setting after reload.We set the correct time and date using the "clock set" command and it shows up as below:=============================RP/0/RSP0/CPU0:ios#sh platSat Nov 4...

nesttech1 · 07-12-2024

Thank you for this link.We followed this procedure and everything worked perfect.

nesttech1 · 05-12-2024

There are absolutely no error logs on the console.Typically, the first time the module is booted it can take 20-40 minutes for it to become active, but we have waited over 2 hours and nothing happens at all.

nesttech1 · 03-30-2024

these slides are showing SFC3 type fabric card which have 600G capacity, but we are running SFC type fabric cards with only 230G capacity

nesttech1 · 11-05-2023

We are just trying to set the correct date and time for the regular XR Console for now.Every time the clock goes back to the previous setting (June 23)Maybe this router need a battery on the main board to be replaced?Thank you!

nesttech1 · 11-05-2023

We have tried the "update-calendar" command, but it says that it is not applicable for this platform. See below:RP/0/RSP0/CPU0:ios#clock set 18:49:30 november 5 2023Fri Jun 23 18:46:40.140 PDT18:49:30.008 PST Sun Nov 5 2023RP/0/RSP0/CPU0:ios#clock u...

Member Since	‎06-20-2014 12:18 PM
Date Last Visited	‎08-29-2024 12:39 PM
Posts	41
Total Helpful Votes Received	10

User Statistics

User Activity

Moving configuration from RSP440 to RSP880

NSC-55A2-MOD-SE-S procedure for IOS XR upgrade

A9K-8HG-FLEX-TR not booting with A9K-RSP880-LT-TR running IOS XR 7.9.3

A99-12X100GE with A99-SFC-S / A99-SFC-T without being oversubscribed

ASR-9901 not keeping the clock setting

Re: NSC-55A2-MOD-SE-S procedure for IOS XR upgrade

Re: A9K-8HG-FLEX-TR not booting with A9K-RSP880-LT-TR running IOS XR 7

Re: A99-12X100GE with A99-SFC-S / A99-SFC-T without being oversubscrib

Re: ASR-9901 not keeping the clock setting

Re: ASR-9901 not keeping the clock setting