About hfrohr001

hfrohr001 · 03-08-2017

HI, I have one SG200-50P switch that is presenting an Alert log: @HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed. adds 0x****, dev_num 0, val 0x0, retries 3) was detected.. This alert repeats (with different address values), +- ever...

hfrohr001 · 11-18-2016

Hi Experts, greetings. I have the following configuration on the RV325. VLAN 10 (10.10.10.x) VLAN 20 (10.10.20.x) VLAN 30 (10.10.30.x) VLAN 40 (10.10.40.x) VLAN 50 (10.10.50.x) Currently, I set the INTER-VLAN to ALL those VLAN, and I'm able to see...

hfrohr001 · 07-14-2014

RV042G Router - Inter VLAN:Does this router supports 802.1Q? Or should I connect one router port per VLAN? eg. If I have 2 VLAN configured on ONE SWITCH, Do I: a) TRUNK the VLAN on SWITCH and connect ONE port to the ROUTER? b) conne...

hfrohr001 · 03-24-2017

Hi Ingrid, Greetings. Thanks for the fast feedback. I just contacted the Small Business (0800 892 1019), but they commented that as the switch was bought at US (Amazon.com), and we are at BRAZIL, they can not open a ticket from BRAZIL. He asked me ...

hfrohr001 · 03-10-2017

Hi Jonathan, Greetings, The factory reset was my first action, but even after the factory reset, the alert continues. Then, I did the FW upgrade, and again, the error continues. I'll open a case as advised! Thanks Henrique

hfrohr001 · 07-14-2014

Hi Chrebert, Thanks for the reply. We plan to use the following SWITCH SG200-50. By the way, from CISCO, what should be the selected router (low budget) to be used on this scenario (802.1Q)? Cheers,Henrique

Member Since	‎07-14-2014 12:18 PM
Date Last Visited	‎08-18-2017 04:02 AM
Posts	6

User Statistics

User Activity

SG200-50P - Alert on LOG. POE ERROR

RV325 Router - Inter VLAN Networking.

RV042G Router - Inter VLAN

Hi Ingrid, Greetings.

Hi Jonathan, Greetings,

Hi Chrebert, Thanks for the