Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Has anyone implemented a scheme to get an alarm when CEF is disabled?We had a situation where a BGP flapping caused a huge memory allocation and automatically disabled CEF, turning all MPLS sessions down. We'd like to have a way to know when this hap...
Hi,We are measuring traffic in an E1 serial link on a 7500 with NetFlow. We are getting measures of more than 3 Mbps at peak hour! It seems that when the real traffic exceeds 1Mbps, the couter used by the aggregation scheme wraps or gives wrong infor...
I have NetFlow configured on an MPLS PE (72xx, IOS 12.2(15)T5) interface connected to a CE using ip route-cache flowmpls netflow egressand I'm getting a lot of fragmentation failures on the exported packets.I have the same NetFlow configuration on an...
Thanks, but in this case, INPUT_SNMP and OUTPUT_SNMP refers to input and output interface indexes respectively. With this, it aggregates the amount of bytes that go from one input interface to a different output interface (just one way).Thanks again!
