Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings, I took a brief look at the Intel doc's and they state this works with 802.3ad which is LACP not PaGP. I believe you need to change the Etherchannel to support LACP instead of PaGP. Cheers, J. Terheun
Greetings, IF the 2924 is connected to one other switch you should make the Giga port (2/1) a trunk port like so.. #interface giga2/1 #switchport mode dynamic desirable #switchport trunk encapsulation dot1q A like configuration on the recieving...
Greetings, You don't need to do anything to 'untag' the frame. Once it passes from the trunk port to the access port, the frame is untagged. So if it enter's a switch on a DOT1Q trunk link, and goes to say a user port (access) the tag is removed. Do...
Greetings, Is the root switch the same for all vlan's? (#show span). I would try playing with different root's, see if it prefer's a different switch for proper inerop between your disparet devices. Cheers, J Terheun
