About schreiberwayne

schreiberwayne · 08-19-2008

Hi I have a CME 4.3 router plus unity Express 3.1 system that is causing me some issues with my config when using COR. when i set the COR restictions on the Dial peers they work correctly and restict the calls to the correct destination - the issu...

schreiberwayne · 02-20-2008

Hi,Does any know of a easy way to match say 200 DID's (PRI) to unmatching internal ext numbers - without creating a huge amount of dial peers, so ie. external number 0123456789 goes to 2120123456799 to 267 ....etc etcThe example of this is when a com...

schreiberwayne · 09-18-2008

found the problem my self after going back through the config - some of the users were in a different cor group with the same name applied as outgoing further down in the config - when i had tested the cor it was with these users - so in effect it wa...

schreiberwayne · 08-19-2008

Hi,Thanks for the quick response. I have tried to make the changes - but as soon as a enter in any of the COR lists on the dial peers it fails to accept the suggested value:corlist outgoing international = COR list not defined - it will only take c...

schreiberwayne · 02-21-2008

Hi,Just tried this with the secondary number and using a default .T dial-peer - worked a treat.Thank you. My first mistake was that i needed to strip of the Area code from the secondary number - once i did this it worked fine.Cheers, Wayne

schreiberwayne · 02-21-2008

Thanks, nice one - this is what i am looking for, it is the non-contigous address space that was causing me issues. I presume this would just require secondaty numbers on the ext & a dialplan-pattern and a voice dial-peer to route calls correctly to...

Member Since	‎08-10-2003 04:20 AM
Date Last Visited	‎02-20-2019 02:06 AM
Posts	6

User Statistics

User Activity

CME 4.3 Using COR stops internal calls

Multiple DID to unmatching internal Ext - CCME

Re: CME 4.3 Using COR stops internal calls

Re: CME 4.3 Using COR stops internal calls

Re: Multiple DID to unmatching internal Ext - CCME

Re: Multiple DID to unmatching internal Ext - CCME