About willfachi

willfachi · 04-11-2004

IOS - Ver 12.2(14)SY1ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)BOOTLDR: c6sup2_rp Software (c6sup2_rp-JK9SV-M), Version 12.2(14)SY1___________________________________________________Attempted to generate RSA key to use ssh and...

willfachi · 04-06-2004

I have a 20 3550/2950 clusters throughout my network that have vlans already on them. Question is,server guy want to install 1 gig cards in their servers (Intel/Pro 1000) by just loading the drivers without any additional setup. I don't know enough (...

willfachi · 03-13-2004

This is the scenario: Router 2600I have a serial port configured as follows:interface Serial0 description Test 56 kbps Circuit #TEST-New ip address 10.20.1.1 255.255.255.224 ip route-cache ip mroute-cache bandwidth 256 no shutdown ipx network BBOQ11...

willfachi · 03-11-2004

Hello,I am working with 2600 and 2950's and I would like to selectively reset different interfaces back to their default settings or basically clear the interfaces. I've looked but can't find the command to do this. Any help would be appreciated.tia ...

willfachi · 12-24-2003

Currently running Windows RWAN 1.2 CD 4th Ed.(RME3.3). I want to upgrade to RWAN 1.3. I want to do fresh 1.2 install then upgrade.1.) Can I export devices *only* from current system to be imported into upgraded system.2.)I want to use Turbo TFTP serv...

willfachi · 04-18-2004

Thanks for the help - it is as we thought!regards - willfachi

willfachi · 04-16-2004

Just a thought - You might want to give your new settings a few hours or a day or so to make sure nothing drastic has happened before you save your running config. Just a small amount of caution might keep you out of a potentially bad situation. Of c...

willfachi · 04-16-2004

Thanks for replying!To begin with, prior to attempting to generate the RSA key, all previous changes were updating to the standby with no problems. It was only after the RSA attempt that any command that was issued showed sync problems.The following ...

willfachi · 04-07-2004

Extensive data transfers across multiple vlans. Will soon be going to VOIP as well as tele-conferencing. Generally all data will be deployed from one Novell 5 server soon to include another. Server is maxed out at 100 and we need more bandwidth.Sorry...

willfachi · 03-12-2004

Of course it worked like a charmThanks!

Member Since	‎08-11-2003 05:47 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	10

User Statistics

User Activity

Problem syncing to stanby on 6513

Setting up VLANS

Mistake on setting interfaces default

Resetting interfaces back to default

CiscoWorks Upgrade

Re: Problem syncing to stanby on 6513

Re: Removing IPX off of routers and switches

Re: Problem syncing to stanby on 6513

Re: Setting up VLANS

Re: Resetting interfaces back to default