Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a VPN tunnel between two routers. My router also connects directly to internet [aDSL].I need to PAT my inside host [192.168.0.2] to the outside interface when connecting to the internet.I also need to static NAT my host to 172.25.100.230 wh...
Hi,I have a VPN tunnel between two routers. My router also connects directly to internet [aDSL].I need to PAT my inside host [192.168.0.2] to the outside interface when connecting to the internet.I also need to static NAT my host to 172.25.100.230 wh...
Hi,Can you help please?I have four 1200's covering an area, with some radio overlap.One of the AP's is causing it's switch-port to go into spanning-tree "Altn BLK" state constantly.The AP's are running an more or less 'out-of-the-box' configuration.T...
Hi,Can you help please?I have four 1200's covering an area, with some radio overlap.One of the AP's is causing it's switch-port to go into spanning-tree "Altn BLK" state constantly.The AP's are running an more or less 'out-of-the-box' configuration.T...
Hi,Can you help please?I have four 1200's covering an area, with some radio overlap.One of the AP's is causing it's switch-port to go into spanning-tree "Altn BLK" state constantly.The AP's are running an more or less 'out-of-the-box' configuration.T...
Hi,Can you please explain more?We also have three other AP's plugged into the same switch on the same VLAN, and they are not experiencing a problem.The problem seems to be the Switch receiveing BPDU's from the AP.How can this happen if we don't have ...
Hi thanks for the reply,Is that the same for FWSM 2.3(1)?Also, how do I insert statics above existing statics in a production config?I don't want to rremove the existing line:---------------static (inside,outside) 10.11.0.0 10.11.0.0 netmask 255.255....
Hi,Thanks for the reply.My Radius server doesn't actually reply directly.It goes off and queries an Active Directory.How can I make AD return the "Class attribute (attribute 25)" to the Radius Server, and hence the VPN3K??Regards,
