Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Aforementioned switch - GE9 & 10 are ComboC ports (copper and SFP), though I can find no place to enable them as copper (fiber not needed)... Also, just upgraded to latest f/w, hoping that'd reveal some missing option / menu / etc. But no change...
Hello all,
At my home I put together a switch block, as learned in CCNP Switching. I plan for a gaming server, and a file sever. I'm fortunate enough to have dual single-homed network connections to play with, so the choice to use HSRP, and not GLBP...
Actually THEY ARE GUI-only devices. The SG200E has cli access. However, I was able to save the config via http and pasted here: Begin paste> config-file-headerswitchcceeaav1.4.9.4 / R800_NIK_1_4_205_011CLI v1.0set systemfile SSD indicator plaintext@v...
I have all eight POE ports assigned to WLC & APs. I wanted to use the 9'th port as an untagged port for direct local switch access, as there is no console port on this device. I'm not trying to insert any SFP, I just want to assign VLAN1 (if not alre...
Yes, they were purchased based on their revision level. I believe I got it working in the end, apologies I've been busy with so many other things (Ciena!) since then, I forgot about this post. Forgive me. Thanks to you all.
