About zvladov

zvladov · 08-18-2003

When trying to configure the connectif the source interface of the AtoM [PW/l2transport] ison of the above PA-MCX-8TE1, it doesntgive the opportunity to finish thel2transport configuration.The MPLS route part doesn't show at ALL!!!MPLS is over the AT...

zvladov · 03-25-2004

Hi,It depends very much on what you want to do-i.e. what services/routing protocols/port adapters/you intend to offer/run/use/.Basicaly you should choose one of the latest 12.0S, 12.1E,12.2Strains.No recipes besides the above exist, AFIK.The best thi...

zvladov · 03-25-2004

How do you access the box then?1)If it is by console, do you have under line con 0 transport output telnetIf you don't have it you won't be able to telnet anywhere ;-)2) does cle line vty 1 work?If it doesn't try to setexec-timeout 10session-timeout ...

zvladov · 01-10-2004

ATOM uses LDP. So ATOM trhough different providers is described at the white paper for ATOM and the configs of 12.2S as possible.The things is that the tags are exchanged over LDP. That is the key. You just point-out the IP address of the other ISP u...

zvladov · 11-14-2003

Why don't you create a LSP from PE1 to PE2,but with explicit-path?This will probably do what you want?

zvladov · 11-14-2003

7206 supports MPLS, although if you need AToM, you have to run 12.2S.Are you sure you need MPLS?MPLS is just another switching method.IF you need TE, thats a good reason to switch toMPLS.It seems to me that the equipment listed will notbe sufficient ...

Member Since	‎08-18-2003 03:23 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	14
Total Helpful Votes Received	4

User Statistics

User Activity

AtoM cannot be configured under PA-MCX-8TE1 / 7206VXR/12.2(14)S3?

Re: Service Provider IOS

Re: Telnet and Telnet

Re: AToM traffic-engineering

Re: AToM traffic-engineering

Re: MPLS