Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Currently, my D-Link DIR-625 Router is connected to Linksys CM100 Cable Modem.I want to replace the D-Link Router with a Cisco Aironet 3602i Access Point. Apparently, simply connecting the 3602i AP to the cable modem through Ethernet port doesn't wor...
I have a Cisco Aironet access point AIR-CAP3602I-A-K9. I connected it to my laptop (running Windows 8.1 Pro 64 bit) with a USB-to-DB9 and DB9-to-RJ45 console cable. I could not open CLI via Putty or SecureCRT. After waiting several minutes, I only go...
I have a Cisco Aironet access point AIR-CAP3602I-A-K9. I connected it to my laptop (running Windows 8.1 Pro 64 bit) with a USB-to-DB9 and DB9-to-RJ45 console cable. I could not open CLI via Putty or SecureCRT. After waiting several minutes, I only go...
interface Dot11Radio0 mbssid ssid XYZWhen I used the above command to create a new SSID for Dot11Radio0, it gave me an error "Dot11Radio0: Guest-ssid already existing on ssid Sagittarius".
Hi Rasika,What is the proper way to change the SSID and its password without having to reconfigure everything from the beginning?Can I change them via the GUI?
Thanks Rasika!I think I made a mistake during the process of enabling my AP to be a DHCP server (in order to telnet in to the AP). The ip address and defaut router address mismatched which, I'm pretty sure, was the source of the problem.
