I have enabled port security and tested it... sw1#show port-securitySecure Port MaxSecureAddr CurrentAddr SecurityViolation Security Action (Count) (Count) (Count)----------------------------------------------------...
Hi Gurus, Below are the three VLAN's I have created on my First Switch for the first time ion my lift after watching couple of videos.I am connected to the switch using a serial to usb cable via console. sw1#show vlanVLAN Name ...
What is the difference in the two below ? c1700-advsecurityk9-mz.124-15.T14.bin &c1700-advsecurityk9-mz.124-25d.bin Where can I download IOS images when I do not have a contract with CISCO?How can I know which is the latest version of IOS ?All...
Please advise me on the below error;; I am using tftpd for tft Router#copy startup-config tftpAddress or name of remote host []? 192.168.0.12Destination filename [router-confg]?%Error opening tftp://192.168.0.12/router-confg (Socket error)
I do not know what GNS3-ER is. After google found some linki for GNS 3 and downloaded GNS3 0.8.7. Explored it and could not find the lab you have mentioned. I m a novice in networking and know only few basic commands
thanks everyone... I have the below sets of switches and routers at disposal...2651XM; 2621XM; 2620XM; 2691; 1670; 2950-12/24/48could you please advise of a lab for my CCNA
The following solved the issue. Thanks in advance sw1(config-if)#no switchport port-security mac-address stsw1(config-if)#no switchport port-security mac-address stickysw1(config-if)#shutsw1(config-if)#shutdownsw1(config-if)#no shsw1(config-if)#no sh...