Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,I configured the HTTP auth-proxy on a cisco router 2611XM (IOS 12.2 11T). The configuration is attached. Among them, 192.168.75.100 is the ACS server, 192.168.75.151 is the client machine, 192.168.75.11 is the router.The issue is when I trie...
Hi,I am trying dot1x with a NM-16ESW on a Cisco 3640. Below is my scenario:Cisco 3640Client: windows 2003 (EAP MD5) connect to fa0/15Server: ACS 4.0, connetc to fa0/14Everytime when I started my computer, I was asked to enter the username and passwor...
Does anyone have some idea on how to make sure the outbound/inbound route along the same path when connecting to 2 different ISPs?Thanks and Regards,Wang Jun
Hi there,I am a little confused with what the inbound means in the command 'aaa authenticaion include ...'. Does it mean the traffic is from low security interface to high security interface, or any traffic come into the PIX?Thanks in advance!Regards...
Hi guys,I experienced an issue when I configured zone tansfer between 2 dns servers at internal and external zones. The PIX version is 6.1(5). I believe all the ports (TCP and UDP)are opened. Actually, from internal DNS server, I could query the exte...
Hi,Thanks for your help!I found an error in the sample configuration which blocked the isakmp traffic (UDP port 500), after correcting the configuration, now auth-proxy works. Thanks again,Jun Wang
Hi,Thanks for your help!After I added the lines below:ip http serverip http authentication aaaI could see the login window if I http to my router, however, the window was not like the one shown on the document you mentioned. And, if I follow the inst...
