Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Experts,
I am facing a weird issue on my ASA firewalls.
We have currently ASA 5550 with ASA version 9.1(7)16 for Anyconnect SSL VPN.
We want to replace those devices because they are EOL and because we needed an ASA version that supports PerA...
Hello,We would like to implement MPP on our Routers and Switches to limit Mgmt Protocols to specific interfaces.I was reading about the advantages of MPP over regular ACL applied to interfaces that when a Management Protocol traffic arrived to an unt...
Hi all,I have an already configured and working pseudo-wire connection between HUB side ---> POP1 in order to extend some vlans.Recently we purchased an additional line for backup purpose. I created on HUB side 2 pseudo-wire classes like the followin...
Hello Bastian,
You wrote:
Starting ISE 1.2, you have the ability to select "Static ip/hostname" in the authorization profile, under the WebAuth part. That way you can put ISE's Policy Node IP address if you don't have correct DNS Entry.
I have th...
HI RJI,Thank you for the reply.So in brief you suggest to either use access-class on vty or MPP but not both together.And preferably use access-class on VTY.Right?
