About ricardoclements1

ricardoclements1 · 08-25-2003

Not sure if this should be here or WAN forum.. please advise..Equip: 1760 VPN/K9 with Ethernet WICGoal is to allow access to only a web server behind router (port 80) yet allow any machine behind the router access to the internetProblem is that as so...

ricardoclements1 · 08-25-2003

Equip: 1760 VPN/K9 with Ethernet WICGoal is to allow access to only a web server behind router (port 80) yet allow any machine behind the router access to the internetProblem is that as soon as I apply the access list to int e0/0 the machines behind ...

ricardoclements1 · 08-26-2003

Very helpful. thxDo you know how to get the logs from the console to a file?Running Linux RH 8.0 boxes.Also it seems like things were working ok until the log rate limit was exceeded, then connectivity to the internet (through the router) became bloc...

ricardoclements1 · 08-26-2003

e0/0 is my wan interface and I have been applying it as an inbound filter.here is the config:Current configuration : 1024 bytes!version 12.2service configservice timestamps debug datetime msecservice timestamps log datetime msecno service password-en...

ricardoclements1 · 08-25-2003

I had a similar problem... and go to the linksys config and on the dynamic routing tab enable RIP2. That seemed to make a diff for me...ricardo

Member Since	‎08-25-2003 04:41 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	5

User Statistics

User Activity

Access-list help

Help with access-list

Re: Access-list help

Re: Help with access-list

Re: NAT on Cisco 1721