About marek.hajduczenia

marek.hajduczenia · 11-08-2024

Good morning, Forum In the lab, we have two UCS M4 units with firmware 4.1(2k) and 4.1(2m) and I was asked to upgrade old 1G NICs with UCSC-PCIE-ID25GF (0x8086 / 0x158b / 0x1137 / 0x0225) units for fiber connection. The cards are properly recognized ...

marek.hajduczenia · 11-08-2024

I found the PID list here: https://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-c220-m4-rack-server/model.htmlUCSC-PCIE-ID25GF is listed in the "Alternate PIDs for this product line:" and from what I can find, these are expected to wor...

marek.hajduczenia · 02-04-2024

So yes, the shortcuts work only when Webex is in focus but ... the global shortcuts are still tied to it, with no way to change it. A global CTRL+D for example is somehow tied to CiscoCollabHost.exe launcher and there is no way to bypass to change th...

marek.hajduczenia · 10-28-2014

Thank you, EmilianoI ended up building the service off Gi0/4 as followsinterface GigabitEthernet0/4 no ip address load-interval 30 negotiation auto no keepalive service instance 2100 ethernet encapsulation dot1q 2100 rewrite ingress tag pop 1 symme...

marek.hajduczenia · 10-27-2014

Hi,I have a small problem with configuration similar to what was shown above. This is the configuration I was hoping to get to:Router#show running-config interface gigabitEthernet 0/6Building configuration...Current configuration : 269 bytes!interfac...

Member Since	‎10-27-2014 03:44 PM
Date Last Visited	‎11-19-2024 12:15 AM
Posts	5

User Statistics

User Activity

UCS M4 (4.1(2k) and 4.1(2m)) + UCSC-PCIE-ID25GF + FAN POLICY OVERRIDE

Re: UCS M4 (4.1(2k) and 4.1(2m)) + UCSC-PCIE-ID25GF + FAN POLICY OVERR

Re: The new Webex app stealing my keyboard shortcut

Thank you, EmilianoI ended up

Hi,I have a small problem