@hazayed Awesome, thank you for explanation of pros and cons for each method. Nice work on the documentation above as well, its very helpful as a reference.
Can you skip the NAT and static routes for azure-lb and fw-mgmt, if you use the method described in the AutoScale documentation to provide the LB Health Probes direct access the the outside and inside interfaces (Configured via Platform settings)? h...
I know its an old post but I had the same issues. Cisco Catalyst 3560-CX on IBNS 2.0 w/ Device Sensor and ISE 2.4. No device sensor infos were being sent in accounting messages. I downgraded code to the specific release requested by the compatib...
So, patch 6. Sweet. I did some testing and it seems better... but something is still a bit off.
I created a test profile based on the MAC address of my testing client. As soon as I enable the profile, the endpoint re-profiles and the CoA happens ...
