Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I'm facing a problem with UCS C firmware upgrade and flexflash card.We have some UCS C220 M3 installed with esxi 5.0u2 on flexflash card and we want to upgrade UCS firmware from 1.4.7b to 2.0.1b using the host upgrade utility.The upgrade was d...
Hi all,I would like to have a copy of hard drives of my CUCM 6.1.5 for store it in another place.I found this article related to CUCM 7.1.2 where is indicated the procedure to change a failed hard drive: http://www.cisco.com/en/US/docs/voice_ip_comm/...
Dear community,we have a UCM 7.1 that apparently shutdown itself. Our customer told us that sometimes when arrived in their office, he found the UCM powerd down and he need to power up.I search about this (or similar) problem in the forum but I can't...
Hi all,we have some problem with using Ironport to sending email.The configuration seems to be correct infact some mail go out correctly. But for certain domain, the mail doesn't go out and if I check the message tracking I see this:01 Dec 2010 09:50...
Hi All,I had configured AD integration on my CSC module without problem. The agent is installed directly on AD server (Windows 2003 R2 64 Bit)From User Identification Settings page seems to be all ok.After this, I had configured a policy for account ...
Hi all.
I've also had this problem with archive inspection (bug id CSCut39253) and I solved it upgrading both sfr and firesight management center with latest release (5.4.0.4 for sfr and 5.4.1.3 for firesight management center). Upgrading only sfr to...
Hi Gaurav,thanks for your reply. I already read the whitepaper but it refers to SD cards with 4 partition.Starting from firmware 1.5.4 SD cards has only one single HV Partition, so the white paper seems not apply to the new version of firmware.Regard...
Hi Adrian,today I went to the customer and I verified that probably I'm running the reported bug.Here an extract of show hardware command:Hardware ResourcesPlatform Type 7828I4IR Volume information-----------------------------------------------------...
