Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,We are trying to implement highly available routes to our Layer-2 MS 130 non stackable switches.We would like make sure that MS130's that are connected to both the MX-95's can browser Internet in case of either of firewalls is unreachable.T...
Unable to ping 8.8.8.8 throught console and ssh after assigning VLAN 1 IP . when vlan 1 is dynamic tis able to ping ?After assigned Static IP switch20863b#sh ip intIP Address I/F I/F Status Type Directed Prec Redirect Statusadmin/oper Broadcast-----...
Hi Experts
I have configured ASA 5506-X after configured saved as a startup configured and running configured as soon as i reloaded the device running configuration will go off , set back to default configuration ,, startup configured will be the...
Unable to ping from internal host to outside interface IP , how do i enable icmp for outside (security 0) interface on asa 5505 to ping from inside host (security level 100) ?
Ex:- Outside interface gi 0 ,nameif outside , is set 10.0.1.169
Insid...
Thank you for support , as you said it could not work command is bad parameter value . switch20863b(config)#ip route 0 0 10.0.0.5switch20863b(config)#ip route 0 0 10.0.0.5% bad parameter value switch20863b#sh runconfig-file-headerswitch20863bv2.1.0.6...
Thank you for support
last day i had ran some command after that it has started working . i don't know after entered command and restarted its started working .
ciscoasa# fsck flash:
ERROR: There are one or more sw-modules running on the system. P...
yes i did it , but this configuration is not working
is there any way to allow ?
Is this mention on any cisco website this option is not supporting on asa 5506 like that , could you share the link so that i can share with internal team ?
