About nkarthikeyan

nkarthikeyan · 06-21-2014

Hi, The attached document would be very helpful for you to configure the radius server using MS Windows 2003 DC Server & Cisco ASA to make that to authenticate with Radius Server for authenticating WebVPN Users. This particular Document was very help...

nkarthikeyan · 06-12-2014

Hi, The attached document would be very helpful for you to configure the radius server using MS Windows 2003 DC Server & Cisco ASA to make that to authenticate with Radius Server for authenticating WebVPN Users. This particular Document was very help...

nkarthikeyan · 11-05-2013

Hi ,I have configured my ACE Mod 30 with Admin and some basic settings for Web filtering contexts. After putting the delta configurations for syncing...Configuration mode is showing disabled @ standby ACE, which is correct and as expected.But even on...

nkarthikeyan · 10-31-2013

Hello Techies,Could you please advice how to upgrade from A4.1.0 to A4.2.3??? Is it requires any elevation or intermediate IOS to make it to A4.2.3???If so wat would be the intermediate version i should go with.Appreciate your help, as am very much n...

nkarthikeyan · 10-10-2012

Hi,The attached document describes the configuration parameters for the Blue Coat / Packeteer devices to authenticate with ACS 5.x versions.It defines for both Read only access as well as Read Write Access (Touch).I hope this will be helpful in confi...

nkarthikeyan · 08-16-2020

Hi,Case 1: By default it will be configured with Tunnel All configuration and so it is giving the default route through VPN. You have to configure split tunnel to achieve as you want.link for split tunnel configuration - https://www.cisco.com/c/en/us...

nkarthikeyan · 10-06-2014

Thank you tom for your wishes!!! Many congrats for Nick, Shaun and Wayne :)

nkarthikeyan · 09-25-2014

Hi, You can go through cisco supports and downloads with your cco login and choose your appropriate model.... it will suggest you the latest / last updated version of OS for you. Make sure that you check the RAM requirement and Memeory requirement be...

nkarthikeyan · 09-25-2014

Hi Eric, access-list 111 deny ip 192.168.5.0 0.0.0.255 192.168.6.0 0.0.0.255 access-list 111 deny ip 192.168.5.0 0.0.0.255 192.168.70.0 0.0.0.255 access-list 111 permit ip 192.168.5.0 0.0.0.255 any route-map nonat permit 10 match ip addre...

nkarthikeyan · 09-25-2014

Hi, By looking at your configurations..... the connection between 2950 and 3750 using the default interface shouldn't have any problem...... bcos it will be taking the VLAN 1 as default..... but the other interface with vlan 2 on core and default vla...

Member Since	‎04-15-2011 10:43 PM
Date Last Visited	‎08-25-2024 07:25 PM
Posts	1,202
Total Helpful Votes Received	528

User Statistics

User Activity

Configuring Windows 2003 DC for Radius Authentication & Web VPN on Cisco ASA

Configuring Windows 2003 DC for Radius Authentication for Web VPN on Cisco ASA

Cisco ACE Module 30 - Issue in getting in to config mode

Cisco ACE Module 30 - IOS Upgradation Steps from A4.1.0 to A4.2.3

BlueCoat PacketShaper and Cisco ACS v5 x Configuration.pdf

Re: Cisco ASA 9.12 - SSL Anyconnect VPN Split tunnel

Thank you tom for your wishes

Hi, You can go through cisco

Hi Eric,

Hi, By looking at your