Ahmed Muhi
Level 1
Level 1
Member since ‎09-02-2011
‎07-04-2018

User Statistics

  • 43 Posts
  • 6 Solutions
  • 25 Helpful votes Given
  • 95 Helpful votes Received
Recent Badges
40 Discussion Posts
40 Helpful Vote
50 Helpful Vote
5 Discussion Posts
5 Helpful Vote
30 Helpful Vote
30 Discussion Posts
25 Helpful Vote
20 Helpful Vote
20 Discussion Posts

User Activity

Hi All, I hope you all are doing great. I am facing a problem with MACsec technology, below are the details of my setup: 1- I am using ASR 9010 on one side and ASR9910 on the other side. 2- I am using "A99-12x100GE-CM" and "A9K-8X100GE-L-SE" Line ...
Hello All, Is the A9K-8X100GE-CM Line Card Supported on RSP440 or RSP880? I could not find anything about it online, below are the Data Sheet for RSP440 and RSP880 and there is no mention of the A9K-8X100GE-CM Line Card. http://www.cisco.com/c/en/us/...
Hello All, This is a follow-up discussion to a previous one that I have opened previously, I have an NCS5002 acting as a Satellite, and two ASRs 9006/9910 acting as Hosts using IOS-XR 6.1.2, in an Active/Standby nV Satellite scenario. below are the ...
Hello All, I have the following scenario, I have an ASR9006 and ASR9910 acting as Hosts, and an NCS5002 acting as Satellite, all devices are running IOS-XR 6.1.2, below is the config I am using and some of the show commands for your kind reference, ...
Hello All, I was trying to upgrade the NCS 5002 from IOS-XR 6.0.1 to IOS-XR 6.1.2, during the upgrade I received the below log message, still the upgrade was successful, RP/0/RP0/CPU0:Dec 19 11:47:57.098 : resmon[358]: %HA-HA_WD-4-DISK_WARN : A mo...
Community Statistics
Member Since ‎09-02-2011 09:33 AM
Date Last Visited ‎07-04-2018 12:05 AM
Posts 43
Total Helpful Votes Received 95
Helpful Votes From