Hi,Adding to what Tapan said.is this not working for all the phones? Or for some specific phones?If working for other phone what difference is in the configuration?When putting caller on Hold are you hearing the Dead Air or Tone on Hold?http://www.ci...
Hi,Have a look at the below doc. I have not got any information is thats a POE switch you may need to connect the external power resource. Regarding the voice quality etc it should be good.http://www.cisco.com/en/US/products/ps10500/index.htmlThe Cis...
Hi,Please provide the steps of the requirement. This can be achived by the calling party transformation pattern or translation pattern but need the complete requirement.cheers,Ankit
Hi ,Could you please set the tracing to the detailed level. I opened the attach file and the tracing is set to the Error level which will not get much information. 00:03:45.805 HDR|06/16/2013 CCM,StandAloneCluster,10.11.10.249,Error,8.6.2.20000-2|*^*...
Hi Rajesh,I have looked at the traces and I could see below. The initial leg gets connected fine but the issue is when the extensions are dialling the BIB to join the conference. Have a look at the below traces.#### DA FOR THE CALL 3833 to 3837 ####1...