Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Gents,I recently found out that obe of the stack port on my 3750x is faulty thus failig the ring status of my 2x3750x. With the troubkeshooting that i did, i finaly concluded that the problem is on the port of the master switch. See status below.S...
We already replaced the 2ndcable with a new one as advise by cusco tac hut ti ni avail. Now we are replacing the switch as it might be the stack port that is faulty.Sent from Cisco Technical Support iPhone App
Thanks mate!Here's the show switch stack-ports summary output incase you noticed sonething other than a physical problem.witch01#sh switch stack-ports summarySwitch#/ Stack Neighbor Cable Link Link Sync # InPort# Port Length OK Active OK Changes Loop...
Hi Leo,Thanks!If I plugged in the new switch, will it be switch number 1? I just dont want to mess up the ibterface configs and number.And will it not ibherit the current priority set to switch 1?Sent from Cisco Technical Support iPhone App
