About nealbrothers

nealbrothers · 06-04-2013

We have a Cisco ASA 5505 at our CORP location, which I have configured the Site2Site VPN to our COLO with a Juniper SRX220h, the site to site works fine, but when users access the Cisco VPN client from home, they cant ping or SSH through the Site2Sit...

nealbrothers · 06-17-2013

I am at this point, I have the same problem but with the Windows Cisco VPN cleint I access all my servers and ping ANY host inside my network, switch over to linux or MAC and use its Built_in_VPN I connect fine, and can ping my asa's internal IP 129...

nealbrothers · 06-13-2013

Contacted JTAC, it was on the remote side, had to add the VPN pool 192.168.12.0/24 as well as a policy. Thanks for all your help

nealbrothers · 06-07-2013

The remote device is Junipoer SRX220h, I will be in contact with their JTAC support today to verfiy this and get back you. Do you have a thanks button or a donation button, you have been extremely helpful.

nealbrothers · 06-06-2013

Any ideas?????

nealbrothers · 06-05-2013

Here on the Debugging results from ASA4|Jun 05 2013|06:10:51|106023|99.174.121.14|54463|64.20.30.170|20698|Deny tcp src outside_pri:99.174.121.14/54463 dst inside:64.20.30.170/20698 by access-group "outside_pri_access_in" [0x0, 0x0]4|Jun 05 2013|06:1...

Member Since	‎06-03-2013 06:55 AM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	14

User Statistics

User Activity

Another Problem with Configuring Cisco VPN Client to Site2site VPN access

Traffic not passing through on ASA 5505

Another Problem with Configuring Cisco VPN Client to Site2site V

Another Problem with Configuring Cisco VPN Client to Site2site V

Re: Another Problem with Configuring Cisco VPN Client to Site2si

Re: Another Problem with Configuring Cisco VPN Client to Site2si