Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Experts,I need to carry out a very simple URL rewrite, which according to the Configuration Guide should be VERY simple, but I'm damned if I can get it to work!So here is the scenario:I have a VIP configured on the ACE in DNS, it has 2 entries,...
Hi,We have a pair of ACE20-MOD-K9 in Fault Tolerant mode. They are running multiple contexts and we have a problem with one particular context which is running SSL off-loading. Despite the config being identical on both (accept for the peer addresses...
Hi,Hopefully this should be are really quick question to answer. After doing some research on the Cisco website, I'm lead to believe that I should be able to upgrade my WS-SVC-NAM-1 module to the version 5.0 of software. I have tried this several tim...
Hi,We are currently running a ACE20 with 11 contexts. Recently we have seen that one of the contexts is being 'starved' of resources, especially Concurrent Connections, Bandwidth and Throughput.Whilst we know how to address this situation by realloca...
OK, What am I missing here. Step Three just does not work! I'm trying to implement WPA2PSK on a Cisco 1142 AP running (C1140-K9W7-M), Version 15.2(4)JA1, but I just can't seem to get it to work:ap(config)#Dot11 ssid threeap(config-ssid)#ap(config-ss...
Hi,Microsoft used to provide a free tool call MS Web Application Stress, however it would appear that they have withdrawn it from download. Fortunately I managed to find a link to download it. It can simulate multiple clients and threads to the ACE. ...
On the standby ACE, if this is an ACE service module, have you made sure that on the 6500 you have assigned the VLAN being used by the servers to ACE module in the 6500 config? I've seen people forget this before.Sent from Cisco Technical Support And...
