Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The bug description appears to advise that this is an FTD only bug. The 9.x numbers appear to be ASA. Does this bug affect ASA as well, if so expected patch?
I have a customer who has an inventory control system that is based on Oracle DB. In this DB, there is a list of MAC addresses that are approved for access to their network. What they want is a script that will pull the MAC addresses and push those ...
This issue still exists in 6.3.0 (build 83). FMC will not allow this command:
policy-map global_policy
class class-default
set connection decrement-ttl
I have a FP2110- 6.2.2 with 2 sub-interfaces (vlan11 and vlan99) on physical interface 2. I have a C9300 connected trunked to the FP and have a 2 laptops connected to switch ports that are assigned to the vlan 11 and vlan 99.
FTD vlan 99 - 192.168....
Are the ISR4221 really supported for Snort since it doesn't meet the 8Gb requirement for Memory? I can't find any supporting docs that actually say the 4221 is supported. Any feedback would be greatly appreciated.
1st Problem Solved. Bad ethernet dongle on my MacBook. Sheesh! Now if I have the default Access Policy set to allow, everything can ping everything as expected.
Locking down via ACL, im creating Zones for each VLAN and then creating appropriate p...
Hey Jason, Thanks for the reply. Here's what I got from TAC and ISE-PMTAC: "Any RHEL vulnerabilities found would need to be patched by the Linux Admin and not via ISE patch."ISE-PM: "We do not issue patches for Linux OS vulnerabilities. That would co...
Great document. Is it a caveat that the "diagnostic" port on a 5516 is different than the "configured MANAGEMENT port and can't be on the same subnet as my inside interface?
