Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to get my PIX 501 v6.3(1) to allow an IPSec VPN session to be established from a PC running a VPN client to a server on the net. Forthis thread, I'll ID my inside net as 192.168.1.0 and the outside as 10.10.10.0/24. I have played witha v...
I found a link on cisco.com for "Configuring an IPSec Tunnel through a Firewall with NAT" that might be what you're referring to (http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009486e.shtml).I think it predate...
Just a correction of a typo and one note of explanation:The fixup line should have read "fixup protocol esp-ike" of course.If you're wondering why the VPN server's address is shown as a subnet with a mask in the access-listinstead of as a host, it's ...
